Home > SHOP > Wideband Air/Fuel
Wideband O 2 Air/Fuel
Sort By:
Page of 1
Wideband O2 Touch Screen Multi Guage for Vacuum & Boost SM-AFR Wideband DM-6 Gauge Combo (Gen4)

Best Seller! The DM-6 + SM-AFR Gen4 Gauge Combo is a tuner grade Bosch LSU 4.9 wideband oxygen sensor controller with 2 1/16" touch screen gauge. Accurately reads the air/fuel ratio of any internal combustion from 0.68 Lambda to 1.36 Lambda (10:1 - 20:1 AFR *Gasoline). Fully plug and play, no sensor calibration is required. Compatible with Gasoline, Diesel, Ethanol, Methanol, E85, LPG, CNG. Accurate to 0.1AFR with less than 100mS reaction time from rail to rail. Advanced sensor health monitoring, displays oxygen sensor health and reaction time on the DM-6 gauge.

Price: $199.99
Sale Price: $169.99
Savings: $30.00
Wideband O2 Air Fuel Ratio Sensor Module for Vacuum & Boost SM-AFR - Wideband Air/Fuel Sensor Module

The SM-AFR Gen4  is a tuner grade Bosch LSU 4.9 wideband oxygen sensor controller with digital/analog outputs for 3rd interface. Accurately reads the air/fuel ratio of any internal combustion from 0.68 Lambda to 1.36 Lambda (10:1 - 20:1 AFR *Gasoline). Fully plug and play, no sensor calibration is required. Compatible with Gasoline, Diesel, Ethanol, Methanol, E85, LPG, CNG. Accurate to 0.1AFR with less than 100mS reaction time from rail to rail. Advanced sensor health monitoring, displays oxygen sensor health and reaction time when connected to DM-6 gauge.

Price: $179.99
Sale Price: $149.99
Savings: $30.00
Wideband O2 Air Fuel Ratio Touch Screen Multi Gauge for Vacuum & Boost DM-6 2 1/16" Touch Screen Multi-Gauge

The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.

Price: $99.99
Sale Price: $79.99
Savings: $20.00
OBD OBD2 OBDII Touch Screen Multi Gauge for Auto OnBoard Diagnostic Scan DM-100 2 1/16" OBDII Touch Screen Multi-Gauge

The DM-100 OBDII Touch Multi Gauge is a scan tool, code reader, and performance gauge all in one. It is compatible with 1996 and later vehicles and connection is made through the onboard diagnostic port (OBDII / CAN). The DM-100 Touch Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. The 4 button multi-touch interface is built right into the gauge, located on the top, bottom, right, and left sides of the visual display. This makes navigating between the 26 OBDII sensors and 15 gauge views ultra-easy. Custom gauges, peak/hold, customizable colors and multiple gauge views are just some of its many features.

Price: $199.99
Sale Price: $199.99
Bosch LSU4.9 Wideband Oxygen O2 Air Fuel Ratio Sensor Bosch LSU4.9 Wideband Oxygen Sensor

The Bosch LSU 4.9 wideband oxygen sensor is a 5 wire sensor with a built-in calibration resistor with an M18 x 1.5 thread. This is the industry standard sensor for tuning internal combustion engines of various fuel types (gasoline, diesel, ethanol, methanol, LPG, CNG, E85). The wideband oxygen sensor is sometimes referred to as a lambda sensor or UEGO. It is the ideal sensor to be used with all PLX Wideband Controllers. Each sensor is hand tested by a PLX technician to verify its accuracy and precision. For use with PLX Gen4 or later Widebands ONLY.

Price: $99.99
Sale Price: $89.99
Savings: $10.00
Bosch LSU4.9 Wideband Oxygen O2 Air Fuel Ratio Sensor Harness Bosch LSU4.9 Sensor Harness

The O2 sensor harness connects the PLX Wideband Controller with a Bosch LSU4.9 sensor. It includes a 6 position molex mini fit jr male plug on one end and a standard 6 position Bosch LSU4.9 connector on the other end. The cable is 10ft (3m) long and is made in USA. For use with PLX Gen4 or later Widebands ONLY.

Price: $29.99
Wideband O2 Touch Screen Multi Guage for Vacuum & Boost SM-AFR Wideband + MultiGauge Link Combo (Gen5)

The new PLX Wideband AFR Smartphone combo takes engine efficiency to the next level. Our Wideband SM-AFR controller coupled with the new MultiGauge Linkā„¢ allows you to wirelessly send data to any smart device eliminating the need to install dedicated gauges in your vehicle. Simply launch the MultiGaugeā„¢ app, available now for Apple and Android, to instantly connect to your smart device for brilliant real-time gauges.

Price: $249.99
Sale Price: $199.99
Savings: $50.00