DM-6 Touch Screen Multi Gauge
$99.99
Now Shipping.
DESCRIPTION:
The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.
- Video
- Tech Specs
- Included Items
| Physical Dimensions: | Standard 2 1/16 x 0.7" (52 X 18 mm) |
| Display Technology: | 1.10" OLED Screen (124 x 36 pixels) LED (16 Green, Yellow, Red) |
| Viewing Angle: | 180 Degrees |
| Polarization: | None |
| Supply Voltage: | 3.3V and 8V from SM Module |
| Power Consumption: | < 1 Watt |
| Cable Length: | 6' Power, 6" Serial |
| Operating Temp: | 0 - 85 Degrees Celsius |
| Human Interface: | 3 Button Capacitive Touch |
| Number of Sensors: | 16 Maximum Daisy Chain |
| Supported Units: | US Standard, Metric |
- DM-6 2 1/16" (52 mm) Gauge
- 4 Pin connector for SM-AFR connectivity
- 2 Terminals for 4 pin Connector
- 3 Wire 8 V. Power Converter
- 3.5 mm Y Splitter
- 6" M/F Extension Serial Cable
- User Manual
Custom Multi Gauge with OBD II
DM-100 OBD II |
|
2 1/16" |
|
List Price: |
$379.99 |
Price: |
$209.99 |
Savings: |
$170.00 (44%) |
DM-200 OBD II |
|
60mm |
|
List Price: |
$399.99 |
Price: |
$259.99 |
Savings: |
$140.00 (35%) |
Eliminate the need for multiple gauges with the PLX MULTI-GAUGE. Run PLX Sensor Modules and view up to 4 parameters at once on one crystal clear Organic LED display. Thought our custom MULTI-GAUGE couldn´t get any better? It just did. With OBDII plug & play connectivity, you can view your ECU data and PLX Sensor Module data at the same time.
Features:
- Universal OLED color display available in sizes 2 1/16" or 60mm.
- Compatible with all OBDII protocols (1996 & newer)
- Check and clear Check Engine Lights and codes
- Customizable gauge styles, backgrounds & colors
- Analog, Digital, Graph, 4 Parameter styles
- Organic LED display
- Set peak and hold points
- Intelligent warning
- Daisy chain up to 32 PLX Sensor Modules
- Simple to install, Installs in seconds
- Remote control included
Description:
The PLX MULTI-GAUGE is designed specifically to display a wide variety of automotive information far superior to that of a standard automotive gauge. The MULTI-GAUGE can display up to 4 different sensors of your choice simultaneously. Unlike other automotive displays on the market where the user has no choice but to view the data presented in one form, PLX has designed the MULTI-GAUGE so that you can set and change your viewing preferences at any time. All styles have their unique advantages and you should not be limited to one option.
The PLX MULTI-GAUGE has taken the automotive display to a whole new level. Now not only can you daisy chain our Sensor Modules but you also have access to data on your ECU. This allows you to view parameters from your vehicle's computer and also act as a scan tool to check and clear engine codes when necessary.
The PLX MULTI-GAUGE has taken the automotive display to a whole new level. Now not only can you daisy chain our Sensor Modules but you also have access to data on your ECU. This allows you to view parameters from your vehicle's computer and also act as a scan tool to check and clear engine codes when necessary.
- Videos
- Available OBD II Parameters
- Awards
- Technical Specifications
- Included in the Box
- Additional Features
- Multi Gauge PC Software
- Throttle Position
- Intake Pressure (MAP)
- OBD Type
- Fuel Level
- RPM
- Air Flow (MAF)
- Oxygen Sensor Voltage1 (Bank 1)
- Barometric Pressure
- MPH
- Short Term Fuel Trim (Bank 1)
- Oxygen Sensor Voltage2 (Bank 1)
- Catalytic Converter Temperature
- Engine Load
- Long Term Fuel Trim (Bank 1)
- Oxygen Sensor Voltage1 (Bank 2)
- ECU Voltage
- Engine Timing
- Short Term Fuel Trim (Bank 2)
- Oxygen Sensor Voltage1 (Bank 2)
- ECU Voltage
- Engine Timing
- Short Term Fuel Trim (Bank 2)
- Oxygen Sensor Voltage2 (Bank 2)
- Absolute Engine Load
- Air Intake Temperature
- Long Term Fuel Trim (Bank 2)
- Ambient Air Temperature
- Water Temperature
- Fuel Pressure
- Fuel Pressure Relative
**Some of these parameters will be not available in all vehicles. Please check with your vehicle manufacturer if you have questions regarding what your specific vehicle offers.**
SEMA Runner Up Best New Interior Accessory 2007
8 Global Media Choice Awards 2007
SEMA Best New Interior Accessory Award 2008
SEMA Best New Mobile Electronics Entertainment Award 2008
17 Global Media Choice Awards 2008
| Physical Dimensions (Box): | 4" x 2.875" x 1.125" (104mm x 75mm x 28mm) L x W x H |
| Physical Dimensions (Gauge): | DM-100 2 1/16" x 0.7" (18mm) DM-200 60mm x 0.7" (18mm) |
| Power Consumption: | 1.5 Watts |
| Compatible HDD: | HDD-200 Processors Custom PLX 32 Bit Processor, Custom PLX GPU (Graphics Processor Unit) |
| Operating Temperature: | 0 - 85 Deg C |
| Operating Voltage: | 10V-18V |
| Automatic Sensor Detection: | YES |
| Human Interface: | 4 Button Remote |
| PC Interface: | USB 2.0 |
| # Sensor Modules: | 1-32 |
| Firmware Upgradeable: | Yes |
| Enclosure: | Extruded Aluminum |
- Multi-Gauge OBD II Module
- 2 1/16" or 60mm Universal OLED Display
- 6ft 4 button remote
- 4ft power wire with 2.1mm connector
- 1ft Serial Cable
- 6ft USB Cable
- CD includes User Guide, Multi-Gauge Utility, USB Device Driver
- Comprehensive User Guide
- Color Organic LED Technology (OLED)
- View ECU Sensor Data
- 180 Deg Viewing Angle
- High Contrast, Daytime visible
- Multiple gauge styles (gauge, numeric, plot, 4 param, x-y scatter, custom)
- Peak and hold (4 parameters, high and low)
- Intelligent warning (4 parameter comparison)
- Custom gauge design
- 4 button remote
- Daisy chain topology
- Custom wallpaper upload
- Automatic sensor detection
- Extruded aluminum construction
PLX DM-100/200 Utility
This utility allows you to upload custom wallpapers, upload custom gauges, and update the sensor table from your PC to your DM-100/200 universal OLED gauge.
Current Software:
Version 3.1 (5/14/2009)
Compatible Operating Systems:
2000/XP/Server2003/Vista
Download (Full Version): DM-100UtilityV3.1.zip (290KB)
Installation: Download and unzip, Run setup.exe to install
Users Guide: DM-100_200UtilityUserGuide_V2.1.pdf (PDF)
DM-100/200 USB Device Driver: CDM_Setup.exe (2.0MB)
Download Custom Gauge Designs
Recommended System Requirements:
Pentium 4/III/II Celeron 1GHz+Athlon/Duron 1GHz+
256MB Ram
A CALIFORNIA COMPANY COMMITTED TO EXCELLENCE AND INNOVATION