SM-PRO Combined Sensor Module Array

Home > Wideband O₂ >

SM-PRO - Combined Sensor Module Array

Alternative Views:

SM-Pro is a combined sensor module for accurately measuring Vac/Boost, Exhaust Gas Temperature, Air Intake Temperature, Fluid (Oil/Water) Temperature, and Fluid Pressure.

Includes genuine Honeywell 3Bar Vac/Boost sensor (built-in), wires/connectors for digital interface with DM-6, DM-100/200, MultiGauge Link. Also includes analog outputs for interfacing with 3rd party ECU's and data loggers.

*Please note, SM-PRO comes with ONLY the Vac/Boost sensor built-in. To measure Fluid Temp, Exhaust Temp, Air Temp, and Fluid Pressure, please add the appropriate sensors from accessories section below.

Price: $239.99

Sale Price: $219.99

Savings: $20.00

Product Code: 897346002085

Qty:

Description

Extended Information

SM-Pro
User Manual

The SM-Pro combines the leading industry's aftermarket sensors into one control module. Out of the box, SM-Pro can measure 3Bar Vac/Boost with the built-in genuine Honeywell sensor. Simply add additional sensors from the accessories section below to obtain Fluid Temp, Exhaust Gas Temp, Air Temp, and Fluid Pressure readings. SM-Pro automatically detects sensors that are connected and streams data via the digital output interface to the DM-6 MultiGauge or MultiGauge Link for display on your Apple/Android smart device. Each sensors is digitally monitored and refreshed at 10Hz (10 times/second) for exceptional accuracy and smoother gauge movement.

iMFD Sensor Table:

Sensor	Address	Units	Min	Max
Wideband O2	0	0 - Lambda	0.68	1.36
		1 - Gasoline (14.7)	10	20
		2 - Diesel (14.6)	9.93	19.86
		3 - Methanol (6.4)	4.35	8.7
		4 - Ethanol (9.0)	6.12	12.24
		5 - LPG (15.5)	10.54	21.08
		6 - CNG (17.2)	11.7	23.39
		7 - E85 (9.76)	6.64	13.27

Exhaust Gas Temp	1	0 - Celsius	0	1023
		1 - Fahrenheit	32	1873

Fluid Temp	2	0 - Celsius Water	0	150
		1 - Fahrenheit Water	32	302
		2 - Celsius Oil	0	150
		3 - Fahrenheit Oil	32	302

Vacuum	3	0 - Vac in/Hg	29.93	0
		1 - Vac mm/Hg	760	0

Boost	4	2 - Boost 0-30 PSI	0	30
		3 - Boost 0-2 kg/cm 2	0	2.07
		4 - Boost 0-15 PSI	0	15
		5 - Boost 0-1 kg/cm 2	0	1.12

Air Intake Temp	5	0 - Celsius	0	150
		1 - Fahrenheit	32	302

RPM	6	0 - 8k	0	8000
		1 - 12k	0	12000
		2 - 20k	0	20000

Speed	7	0 - MPH	0	160
		1 - km/H	0	258

Throttle Position	8	0 - Percent	0	100

Engine Load	9	0 - Percent	0	100

Fluid Pressure	10	0 - PSI Fuel	0	120
		1 - kg/cm 2 Fuel	0	8.44
		2 - Bar Fuel	0	8.27
		3 - PSI Oil	0	120
		4 - kg/cm 2 Oil	0	8.44
		5 - Bar Oil	0	8.27

Sensor	Address	Units	Min	Max
Timing	11	0 - Degree	-64	64

Manifold Absolute	12	0 - kPa	0	255
Pressure (MAP)		1 - inHg	0	75.3

Mass Air Flow (MAF)	13	0 - g/s	0	655.35
		1 - lb/min	0	86.69

Short Term Fuel Trim	14	0 - Percent	-100	100

Long Term Fuel Trim	15	0 - Percent	-100	100

Narrowband O2	16	0 - Percent	0	100
		1 - Volts	0	1.275

Fuel Level	17	0 - Percent	0	100

Volt Meter	18	0 - Volts	0	20

Knock	19	0 - Volts	0	5

Duty Cycle	20	0 - Positive	0	100
		1 - Negative	0	100

Fuel Efficiency	21	0 - MPG	0	100
		1 - KM/L	0.43	42.51
		2 - L=100KM

Analog Voltage	22	0 - Volts	0	5

Speed (Hertz)	23	0 - Hz	0	10,230

Wideband AFR Status	24	0 - Heating, Ready	0	1

Wideband AFR Health	25	0 - Percent	0	101

Wideband AFR Reaction	26	0 - ms	0	999

Features

9-25VDC power from vehicle's battery
For connecting power to DM-6 MultiGauge and/or MultiGauge Link Smartphone Adapter
Eight 0-5V analog outputs for interface with 3rd party data loggers/ECUs
Termination jumper. Install if it is the end module in digital daisy-chain. Remove if not end module in digital daisy-chain.
Digital input (rx) /output (tx) for digital interface with display modules like DM-6, DM-100/200, MultiGauge Link
Two Fluid Temp inputs for VDO resistive type sensors. Measurement range of 32 - 302 degrees Fahrenheit or 0 - 150 degrees Celsius
Two Fluid Pressure inputs. Measurement range 0 - 150 PSI or 0 - 10.5 kg/cm^2.
Two Air Intake Temp/Exhaust Gas Temp for use with K-Type thermocouple probes. Measurement range is from 32 - 1873 degrees Fahrenheit or 0 - 1023 degrees Celsius for EGT. Measurement range of 32 - 631 degrees Fahrenheit or 0 - 333 degrees Celsius for AIT
One 3 Bar Honeywell Vac/Boost sensor. Measurement range is 30.5 inHg to 30 PSI or 760 mmHg to 2.11 Kg/cm^2.

Included Items:
SM-PRO main unit
Genuine Honeywell 3 BAR Vac/Boost Sensor Built-in
Sensor Module Connect Kit (4ft power wire with 2.1mm connector, 4ft Analog wires, 1ft Serial Cable, 4 Pin connector, 8 Pin connector, 8 Terminals)
Termination jumper
User Manual
*Other sensors sold separately

Accessories

MultiGauge Link 3.5mm Y Splitter Cable

SM-EGT Sensor Kit

SM-AFR - Wideband Air/Fuel Sensor Module

DM-6 2 1/16" Touch Screen Multi-Gauge

Price: $4.99

Add

Sale Price: $98.99

Add

Sale Price: $175.99

Add

Sale Price: $109.99

Add

MultiGauge Link Adapter

SM-AIT Sensor Kit

Sensor Module Connect Kit

SM-FluidPressure Sensor Kit

Sale Price: $89.99

Add

Sale Price: $98.99

Add

Sale Price: $16.49

Add

Sale Price: $111.99

Add

SM-FluidTemp Sensor Kit

Sale Price: $33.99

Add

VDO Vehicle Fluid Temperature Sensor Combo Kit | Automotive Diagnostic

Average Rating: Average Rating: 4 of 5

4 of 5 Total Reviews: 1 Write a review »

0 of 1 people found the following review helpful:

At last!	August 28, 2021
Reviewer: Luis Guilllermo Sanchez from Kissimmee, FL United States

I pre ordered this as the traditional modules occupied too much space and made wiring a nightmare (I basically had them all) It freed my inside dashboard space and made a much cleaner installation. Now, if they offered an equivalent of the DM100 gauges (multiple parameters at the same time on a gauge) I will be extremely happy. DM6 is good but it only shows one parameter at a time so you need a lot of gauges to see a lot of info. I have 2 DM6 and 2 DM100. The DM 6's with 1 parameter and the DM 100's one in 4 paramter view and the other in 2 parameter view.

Was this review helpful to you?

Company

Account

Customer Care