Home > Wideband O2 >

SM-PRO - Combined Sensor Module Array
SM-PRO Combined Sensor Module Array

Alternative Views:

SM-Pro is a combined sensor module for accurately measuring Vac/Boost, Exhaust Gas Temperature, Air Intake Temperature, Fluid (Oil/Water) Temperature, and Fluid Pressure.

Includes genuine Honeywell 3Bar Vac/Boost sensor (built-in), wires/connectors for digital interface with DM-6, DM-100/200, MultiGauge Link. Also includes analog outputs for interfacing with 3rd party ECU's and data loggers.

*Please note, SM-PRO comes with ONLY the Vac/Boost sensor built-in. To measure Fluid Temp, Exhaust Temp, Air Temp, and Fluid Pressure, please add the appropriate sensors from accessories section below.
Price: $239.99
Sale Price: $219.99
Savings: $20.00

Product Code: 897346002085

Description Extended Information

User Manual

The SM-Pro combines the leading industry's aftermarket sensors into one control module. Out of the box, SM-Pro can measure 3Bar Vac/Boost with the built-in genuine Honeywell sensor. Simply add additional sensors from the accessories section below to obtain Fluid Temp, Exhaust Gas Temp, Air Temp, and Fluid Pressure readings. SM-Pro automatically detects sensors that are connected and streams data via the digital output interface to the DM-6 MultiGauge or MultiGauge Link for display on your Apple/Android smart device. Each sensors is digitally monitored and refreshed at 10Hz (10 times/second) for exceptional accuracy and smoother gauge movement.

  1. 9-25VDC power from vehicle's battery
  2. For connecting power to DM-6 MultiGauge and/or MultiGauge Link Smartphone Adapter
  3. Eight 0-5V analog outputs for interface with 3rd party data loggers/ECUs
  4. Termination jumper. Install if it is the end module in digital daisy-chain. Remove if not end module in digital daisy-chain.
  5. Digital input (rx) /output (tx) for digital interface with display modules like DM-6, DM-100/200, MultiGauge Link
  6. Two Fluid Temp inputs for VDO resistive type sensors. Measurement range of 32 - 302 degrees Fahrenheit or 0 - 150 degrees Celsius
  7. Two Fluid Pressure inputs. Measurement range 0 - 150 PSI or 0 - 10.5 kg/cm^2.
  8. Two Air Intake Temp/Exhaust Gas Temp for use with K-Type thermocouple probes. Measurement range is from 32 - 1873 degrees Fahrenheit or 0 - 1023 degrees Celsius for EGT. Measurement range of 32 - 631 degrees Fahrenheit or 0 - 333 degrees Celsius for AIT
  9. One 3 Bar Honeywell Vac/Boost sensor. Measurement range is 30.5 inHg to 30 PSI or 760 mmHg to 2.11 Kg/cm^2.

Included Items:
SM-PRO main unit
Genuine Honeywell 3 BAR Vac/Boost Sensor Built-in
Sensor Module Connect Kit (4ft power wire with 2.1mm connector, 4ft Analog wires, 1ft Serial Cable, 4 Pin connector, 8 Pin connector, 8 Terminals)
Termination jumper
User Manual
*Other sensors sold separately

MultiGauge Link Adapter SM-EGT Sensor Kit SM-FluidPressure Sensor Kit MultiGauge Link 3.5mm Y Splitter Cable
Sale Price: $89.99

Sale Price: $98.99

Sale Price: $111.99

Price: $4.99

MultiGauge Link for Smartphone Interface with PLX Devices Sensor Modules EGT Exhaust Gas Temperature Sensor Module Combo Kit VDO Vehicle Fluid Pressure Sensor Combo Kit for  Automotive Diagnostic MultiGauge Link 3.5mm Y Splitter Cable
SM-AIT Sensor Kit SM-AFR - Wideband Air/Fuel Sensor Module SM-FluidTemp Sensor Kit DM-6 2 1/16" Touch Screen Multi-Gauge
Sale Price: $98.99

Sale Price: $175.99

Sale Price: $33.99

Sale Price: $109.99

AIT Air Intake Temperature Sensor and Module Combo Kit Wideband O2 Air Fuel Ratio Sensor Module for Air/Fuel Ratio VDO Vehicle Fluid Temperature Sensor Combo Kit |  Automotive Diagnostic 2 1/16" Touch Screen MultiGauge | For All Sensor Modules
Sensor Module Connect Kit
Sale Price: $16.49

Wideband O2 OBD2 Sensor Module Connect Kit with Serial & Analog Cable

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 1 people found the following review helpful:
4 of 5 At last! August 28, 2021
Reviewer: Luis Guilllermo Sanchez from Kissimmee, FL United States  
I pre ordered this as the traditional modules occupied too much space and made wiring a nightmare (I basically had them all) It freed my inside dashboard space and made a much cleaner installation. Now, if they offered an equivalent of the DM100 gauges (multiple parameters at the same time on a gauge) I will be extremely happy. DM6 is good but it only shows one parameter at a time so you need a lot of gauges to see a lot of info. I have 2 DM6 and 2 DM100. The DM 6's with 1 parameter and the DM 100's one in 4 paramter view and the other in 2 parameter view.

Was this review helpful to you?