|
|
|
|
. |
|
R-300
In STOCK, ships within 24 hours |
ACQUIRE -> RECORD -> DOWNLOAD -> ANALYZE R-300 Users Guide PLX Logger Users Guide R-300 Interface Diagram ECU Pinout Database Application Notes Ideal For:
Introduction: The R-300 is a compact, dash mountable, easy to use wideband air/fuel controller with powerful data logging capabilities. Wideband air/fuel ratio can be monitored in numeric, gauge or graphical form. Data logger inputs can be fully customized to display virtually ANY type of data. It's like combining 6 gauges into one! The R-300 can store up to 90 minutes of logged data and 99 individual sessions for later PC download and analysis with PLX Logger PC software.
Key Features:
Functional Description:
CLICK TO ENLARGE Wideband Controller Technology Tech Article: PLX Critical Response Wideband Technology The R-300 employs the same race-proven wideband controller technologies as our popular M-Series product line. PLX widebands utilize the latest digital PID and DSP technologies to maximize O2 sensor reaction time and accuracy without compromising overshoot, and slow settling response time. Accurate to 0.1 AFR, this technology is coupled with advanced self sensor calibration circuitry and sensor soft start to both prolong the life of your oxygen sensor as well as eliminate any user intervention for manual sensor calibration. Sensor calibration is NOT required; simply “Plug and Play.” The R-300 can be fully customized to select the specific fuel setting for your application. Fuels with lead are compatible with the Bosch and NTK sensors.
Data Logger Inputs The R-300 features a built-in 6 input (2 speed, 3 analog. 1 AFR) data logger with 90 minutes of on board memory. The 2 speed inputs can be connected to any signal which gives a pulse (Freq Range: 0Hz-10KHz) and the 3 analog inputs can be connected to any signal which gives a voltage between 0-5V. Analog voltages between 5V-25V will be capped at 5V and will not damage the data logger. This gives the user absolute freedom to interface with various signals to and from your ECU. Here are a few examples of signals that can be logged by the R-300
Blue - Speed Signal Red - Analog Signal Visit our ECU pinout database for specific vehicle support Data Logger Onboard Memory/Real-time Streaming The R-300 can store 90 minutes of data, 6 simultaneous channels and up to 99 individual sessions. Logged data can be uploaded to a PC via high speed USB Port for further analysis with the included powerful PLX Logger software. Serial data can also be streamed via USB port for real-time PC monitoring and recording (same as M-500). Sampling rate is 10Hz for 6 simultaneous channels.
Are you a software developer? Here's the serial protocol Advanced PC Software Analysis: The included PC software is both versatile and powerful. Data can be recorded in real-time on the PC or linked with the R-300 to download prerecorded data. PLX Logger (free download) comes with the following key features.
Programmable Warning Light: Protect your engine from damage with the fully programmable warning light. The R-300 warning LED can be fully customized to activate based on a 1 or 2 variable comparison. For example, you may choose to set the warning light to activate if your throttle position exceeds 50% and your AFR rises above 13.9. You may also setup the warning light as a shift light utilizing a 1 variable comparison.
USB Interface:
M-Series 100% Compatibility: The R-300 is 100% compatible with all M-Series wideband controller models. All R-Series widebands have outputs for M-Series WB Linear output (0-5V) and M-Series NB output (0-1V) analog signals. The R-Series and M-Series o2 sensor harness are also identical. No rerouting of your existing M-Series o2 sensor harness is required for R-Series connectivity. M-Series o2 sensor harness will plug directly into the R-Series harness. M-Series 52mm gauge is also compatible with R-Series. R-Series Firmware Reflash Capability: The R-300 consists of the latest 32 bit microprocessor technologies and has a tremendous amount of processing power. New firmware upgrades with additional features will routinely be available. Every R-Series controller comes with a firmware reflash card. Simply connect one end of the card to the R-Series controller and the other end to your computer's parallel port. Upload the new firmware, reboot and your R-Series wideband controller will be instantaneously better than before.
What does the kit come with?
|
